Toyota LandCruiser 70 Series Single Cab Facelift Bull Bar (2024–Current) | The Cruiser Company
Toyota LandCruiser 70 Series Single Cab Facelift Bull Bar (2024–Current)
The facelift 70 Series Single Cab uses a different chassis to Dual Cab, Troopcarrier and 76 Series models. This dedicated TCC Single Cab bar provides a vehicle-specific 5mm steel front-protection system with low-mount winch provision and integrated accessory mounting.
For Brisbane, Ipswich and Blacksoil builds, BEI House can help confirm fitment and quote professional installation alongside recovery and lighting equipment.
Key Features
- Single Cab-specific chassis fitment
- 5mm main steel construction
- 10mm mounting plates
- 60.3mm tube with 3.5mm wall
- 2mm under trays
- Low-mount winch provision
- Roadvision ADR-approved indicators and recessed accessory light
- Four aerial mounting positions
- Provision for 9-inch spotlights
Fitment note: This bar is not cross-compatible with the facelift Dual Cab, Troopcarrier or 76 Series bar.
Designed Specifically For:
- Toyota LandCruiser 70 Series Single Cab Facelift (2024–Current)
Fitment & Compatibility
| Vehicle Make | Toyota |
|---|---|
| Vehicle Model | LandCruiser |
| Series / Generation | 70 Series Single Cab Facelift |
| Model Year | 2024–Current |
| Product Fitment | Facelift Toyota LandCruiser 70 Series Single Cab only |
| Winch Compatibility | Low-mount winch compatible |
| Sensor Compatibility | N/A as specified by TCC |
| Airbag Compatibility | TCC specifies tested airbag compatibility |
| Installation | Approximately 3 hours for a professional fitter; BEI House fitting available |
Product Specifications
| Product | The Cruiser Company Toyota LandCruiser 70 Series Single Cab Facelift Bull Bar |
|---|---|
| TCC Product SKU | TCC-LC70SCPOST-BB-LM |
| Product Type | Bull Bar / Front Protection |
| Main Construction | 5mm BlueScope TRU-SPEC Grade 250 mild steel |
| Mounting Plates | 10mm steel with eyelet |
| Tube | 60.3mm Orrcon C250L0 CHS with 3.5mm wall |
| Under Trays | 2mm steel |
| Approximate Weight | Approximately 60kg |
| Finish | Grit blasted, zinc powder primed and finished in the selected powder coat |
| Manufacture | Australian made by TCC in Pakenham, Victoria |
| Application | Touring / Work / Off-road front protection |
Configure Your Bull Bar
Select the available finish, driving lights and winch above. BEI House will confirm Single Cab fitment before supply or fitting.
Request a BEI House bull bar fitment and fitting quote with your exact vehicle details and planned accessories.